FACE FIXED SOUNDPROOFING DOOR BOTTOM SEAL
A medium duty fully automatic door seal that is morticed into the bottom of the door. It is operated by pressure on an actuator that operates the internal mechanism. Silicon rubber gasket allows this seal to be used in fire door applications. This seal can also be fitted into a hollow bottom section of an aluminium door.
BB-SF 920 Specifications
Min / Max Gap: 3mm / 13mm
Location: Single and double door, butt hinged.
Stocked Seal Sizes: 600mm, 820mm, 920mm, 1070mm, 1220mm. Other sizes may be available upon request. Maximum cutback on each seal 100mm.
Standard Finish: Clear Anodised Aluminium.
Seal Material: Grey Silicon Rubber
Adjustment: Adjustable strike block screw.
Fixing Method: Concealed in Mortice pocket, stainless steel fixing plates. Screws supplied.
Fixing Plate Dimensions: 23mm wide, 60mm high, 1.2mm thick.
Durability: Tested to over 1,000,000 operating cycles without failure.
Applications: Noise, medium temperature smoke, insects and vermin, weather, and HVAC efficiency.
Fire: Conforms to BCA 2012 Spec. C3.4. Sec 3.2 ( c ) Deemed to Satisfy Provisions Tested to AS1530.4—2005.
Acoustics: Conforms to Class 2-9 Buildings BCA 2012 Sec.F5.5 ( b ) Deemed to Satisfy Provisions